The REBEL Stationery CRUSHER® can tackle nearly ANY application, small, medium & large! It has the ability to pre-screen, crush & separate crushed material into three(3) separate stock piles while removing rebar, wire & steel at the SAME TIME!
It has Variable speed, low feed height, & HEAVY DUTY FEEDER. Our Heavy Duty feeder features “mine duty” impact idlers with 4140 over-sized steel shafts specifically designed to handle being continuously fed large chunks of material. When dumping, our feeder absorbs the shock load which produces very little dust & reduces noise.
You can feed the REBEL CRUSHER® with just about any machine ranging from skid steers to excavators to front end loaders.
A high frequency pre-screen filters out the material that you may not want to mix in with the finished product.
The pre-screen has adjustable throw & action, & removable deck allowing operators to change the size of the pre-screen mesh. Operators can also install a “blank off” plate.
It has a HUGE Approx. 500 x 900 mm JAW CRUSHER driven by hydraulic motor and belt drives. OR 740 x 840 mm IMPACT CRUSHER that bolts in place of JAW!!! The crusher can operate forward or backward by simply flipping a switch on the remote control!
The machine features a “simple adjustment” with traditional shims that are easy to install. The Rebel Crusher’s® main wear parts are the same part number & can be swapped or flipped to maximize wear part life.
The four main bearings are oversized & fitted with remote, easy access grease fittings.
The high frequency double deck sizing screen filters out & sizes all of the crushed products.
There are a wide range of mesh sizes available. The screen mesh is wedged in & can be added or removed with ease. The screen can also be removed completely when only one product is desired.
There are three(3) removable & folding side product conveyors which can be easily folded in or out. They feature adjustable skirt board rubber to ensure all material is stock piled with minimal spillage.
In addition, all conveyor belts are pre-spliced & cut to the exact size required.
Hotline: